FFConfigLite

Diagnose and configure modules in your Ford Focus 2 or C-Max I using an ELM327 or ELS27 interface. These interfaces allow access to various CAN-bus modules:

Engine Control Module (ECM): Access module information, read and clear diagnostic trouble codes (DTCs), reboot the module, and reset the long-term fuel trim (KAM) for the following engine types: ESU-411/418 (1.8 125/2.0 145), SIM28/29 (1.4 80/1.6 100/115), and ESU-121/131 (1.8 120/2.0 145).

Instrument Cluster (Dashboard): Access module information, read and clear DTCs, configure the module, reboot the module, change the odometer reading, and correct the odometer reading*.

Brake Control Module (BCM): Access module information, read and clear DTCs, configure the module, reboot the module, reset the Dynamic Stability System (DDS) calibration, and perform brake bleeding*.

Body Control Module (BCM) / Comfort Module: Access module information, read and clear DTCs, configure the module*, and reboot the module.

Airbag Control Module (ACM) / Safety Module: Access module information, read and clear DTCs, configure the module, reboot the module, and clear crash data*.

Transmission Control Module (TCM): Access module information, read and clear DTCs, and reset the KAM*.

Climate Control Module (CCM): Access module information, read and clear DTCs.

Audio Control Module: Access module information, read and clear DTCs, and retrieve the radio code (for M-series)*.

*Some features require the full version of the software.

For full functionality and access to more modules, consider modifying your ELM327 adapter. Instructions can be found here: Http://forffclub.narod.ru/index/0-2

ELS27 adapters can be purchased at: https://els27.ru/. For ELS27USB, set the baud rate to 38400; for ELS27BT-2, use the ELS27 Baudrate utility to set it to 2,000,000.